This park is 2 minutes ride from Darryl and its sick as, blocks are all movable so anything is possible.

The arms are made from tubular heat-treated 4130 CRMO and they are our strongest yet! The axles are 22 mm CRMO ultra hollow, the cranks feature a new CRMO bolt with spline for a better grasp and hold and they feature the invest cast pedal and spindle boss which helps to eliminate any problems with welding in stressful areas.

BMX moves constantly and riders are not only getting more technical but they are pushing everything so tricks become higher, harder, faster and stronger. The ONYX cranks are designed specifically to take the strain, the stress, and the power that now exists at a brand new level. Wanna read the specs and see more photos?

Material: Tubular heat-treated 4130 crmo arms & crmo axle
Length: 170mm or 175mm
Axle: 22mm crmo ultra hollow
Features: Invest cast pedal & spindle boss to eliminate problems with welding in stressful areas • New crmo bolt with spline for better grasp and hold • RSD & LSD compatible • 2 sprocket boltholes on each side

So we took a trip to Atlanta, Georgia recently as a little excuse to get together, shoot some footage and talk about our next venture as a team. It was hot down there, I mean real hot. Riding was limited to a couple of hours a day and the best time was between 5 and 7 most evenings. Atlanta has a lot to offer and is well worth a visit. Check out the video above!

Also, make sure you pick up the new Albion for a sweet spread.

New Bondi Rim Advert with Iz Pulido.

Tocco was in France recently drinking all the french wine and spinning all the bars. Heres a nice little video he’s just put out.

We made it back from Atlanta, the heat was unbearable and I’m not too sure how everyone managed to get clips. The only time that was ok was when the sun went down and that gave us about 2-3 hours per day of filming. The spots are great though and instead of relying on locals we just took to the road and found whatever suited us best, I find this is always the best way. Atlanta is a weird old place, full of money, wealth, crime and poverty. I will say this, the southern hospitality is great but their karaoke sucks.

Daniel Benson of The Albion was on the trip to capture everything and the article will be going in Issue 3 released at the end of this month. A video edit will be out too.

Keep checking back more and follow our twitter to watch a trailer thats not exactly beee emmm eeex.

Yesterday we were helped out by 1101 BMX shop in Atlanta, they set up a little meet and greet where the team were able to give out some brand new t shirts and a few products. They also set up a little demo in the parking lot of a strip club (which was weird) and even though it was in the 90′s we still managed to have a laugh and a ride. Thanks again to Chad Myers and all the Atlanta locals.

Just a quick post as we are currently in Atlanta filming and stopping at the 1101 BMX shop for a meet and greet. IZ is from cali and has just bagged himself a place on the trip as poor Randy broke his foot (get better soon man). We flew IZ a few parts and he was stoked but now we just want to mention that he is officially on our flow team. More coming from the trip and more coming from IZ.

I decided to catch up with Mr Blacksmith and see what’s going on in Portland right now and in general. Chester is a busy guy, always riding, sending emails and planning shit and when he’s not falling off or doing crazy shit on a bike he’s usually supping coffee…

Hey Chester, How’s things right now? You keeping busy?

Yeah man I’ve been trying to make some extra bread for this Alaska trip with my girl that I’m about to take, Shit ain’t cheap. It’s just getting sunny in Portland contently, so it’s time to clock in and get some clips.

So you live in Portland, I hear its pretty cool, what’s the coolest things to do in Portland?

Portland is the best! It’s cheap, the coffee is strong, You can ride pretty much anywhere, We have Burnside skate park plus many more, and the girls don’t look bad either.

How do you cope with the weather in Portland considering the rest of America is so much better? Is Portland jealous?

Man I can’t complain too much, Yeah it rains a lot here, but we only get snow like once every couple years, no tornadoes, the heat hardly reaches over 100 degrees. The only thing is, the consistent wet and grayness during the winter. Some times we don’t get sun for a month at a time. But the city is so good it makes up for it in other ways.

You do always seem to be busy, how does an average day go like?

Wake up, make Coffee, check some emails. Then it’s off to Burnside to meet up with the dudes around 9am. If it’s gonna rain the rest of the day I work on WTP stuff, If it’s nice then I make breakfast after the session then head to another park. Ride some street with the boys. Come home, more emails, then, cup caking with my girlfriend after she gets off work. I don’t really go out much anymore since it cost too much and I’m tired of feeling like shit in the morning. But once in a while it happens.

Eclat is growing and growing, you have been on the team from the start, what do you think of the company and the products and the whole design process from the guys over in Germany?

When Harry asked me if I wanted to ride for Éclat, I was surprised. I didn’t really know what to expect as far as riding for a company that was started by another company all under the same roof. When I started getting the products and riding them It was amazing! I felt like my bike was 10 years ahead of everyone else’s. Of course some of testing stages with the products didn’t go so well but once we got the bugs out I felt like my bike was invincible! In fact my bike is Invincible. After that roof to rail I did not Austin a few years back, the guys in Germany asked me, “Did you think about the chance of your axles breaking when landing on the rail?” I Laughed and said no, ” It didn’t even cross my mind.” Éclat makes the strongest best-looking BMX parts on the market. It’s amazing to say that I ride for them.

So you’re happy then?

Like I said the shit is amazing! I got the bike of the future! HA.

So when I mention Chester Blacksmith to anyone I get a 50/50 reaction, its either ‘he’s mental’ or ‘he really takes it bad’ haha…how are you coping these days with injures? Is your body still in one piece?

HAHA! I’m Mental? I’m not sure if either one of those are good. Um, my body is good right now. I just had a really good trip to California with some of the AM WTP dudes. I rode well, crashed well, and all the above. Yeah I crash a lot. Sometime shits don’t work out. Ok a lot of times shit don’t work out. I’m getting better on picking my battles. But what’d you kids want?

What’s the worst slam you’ve ever had?

Either breaking my leg or breaking my spleen.

What’s with the chin thing, Mexico wasn’t the first time you belted your chin like that right?

Fucking hell. It was like the 10th time I busted my chin open. Once again, bad choice in trying to get a clip on a broken shitty ass hand rail.

Are you saving yourself for Atlanta then?

Yeah man! I really want to start working on Éclat projects now. I’m excited for this Atlanta trip! This will be our first full team Éclat trip with all the dudes. It will be really good to see everyone all in one place.

Whats going to be happening for the rest of the year on your calender then?

Well I’m about to catch a flight to Alaska to go fishing. After that, Éclat in Atlanta, Then were gonna do a 10pack WTP Canada trip! That should be sick! After that I’m hoping to film more for Éclat. Then I’m hoping to talk WTP in to going to Germany around the end of the summer. I’m lined up for a while.